Ford Onboard Scales and Smart Hitch Guide for St. Louis
Ford truck technology • Weber Ford
Understand the load before you leave
Available Onboard Scales estimate vehicle payload. Available Smart Hitch estimates trailer tongue load and helps you assess loading. These features answer different questions, and neither increases the truck’s ratings. Use them with the truck’s labels, loaded-trailer information and the instructions for the exact vehicle.
Payload and tongue load are different measurements
| Feature | What it reports | What you must still verify |
|---|---|---|
| Onboard Scales | An estimate of weight carried by the truck. | Vehicle, axle, tire and payload limits for the actual configuration. |
| Smart Hitch | An estimate of the trailer load carried at the hitch. | Loaded trailer weight, hitch type, recommended loading and all applicable ratings. |
| A certified scale reading | Measured weights for the combination and weighing procedure used. | That every vehicle, axle, tire, hitch and trailer limit is satisfied. |
Confirm the equipment on the exact truck
Look for the feature on the window sticker or original equipment record, then ask to see the corresponding display in the vehicle. A trim name, large screen or towing package description is not enough to establish that Onboard Scales and Smart Hitch are installed.
This guide uses the 2026 Super Duty owner manual as a specific operating example. Other model years or trucks can have different menus, hardware and limitations. Select the manual that matches your VIN before following setup instructions.
For engine, cab and truck-selection questions, continue to the 2026 Super Duty guide. Keep the equipment check separate from the truck’s maximum advertised towing number.
Use Onboard Scales with the complete trip load in mind
In the 2026 Super Duty manual, Onboard Scales uses suspension sensors to estimate payload. The system requires the truck to be on, in Park, on level ground, with the wheels straight and tire pressures at the recommended levels. Follow the manual if the feature is unavailable.
Vehicle Mode shows the current payload estimate. Scale Mode helps assess weight added relative to a reset point. Resetting that reference does not increase the truck’s permitted load or erase cargo already carried.
The manual also provides a passenger and cargo load reminder for weight that is not in the truck while you load it. Account for the people, tools, accessories and other items that will be aboard for the trip. A reading taken before the crew gets in is not the complete departure load.
Give Smart Hitch the correct loaded-trailer information
The 2026 Super Duty instructions use the trailer’s total loaded weight to establish a recommended range for the estimated hitch load. Include the trailer itself and everything it carries. Empty-trailer weight alone does not describe a loaded utility, equipment or travel trailer.
If you select Unknown Trailer Weight, that manual says the system provides a tongue-load estimate without the recommended range. Treat that as a different level of information, rather than assuming the display has confirmed an appropriate distribution.
Select the correct hitch type and follow the on-screen connection checklist. Use the vehicle, hitch and trailer instructions to make adjustments. Recheck the combination when the cargo, passengers, equipment or trailer changes.
Use the estimates alongside the ratings
Read the truck’s tire-and-loading and certification labels and the applicable towing guide. Confirm payload, axle limits, trailer rating and hitch limits for the actual vehicle. The highest number in an advertisement may belong to a different engine, axle, cab or equipment combination.
An estimate can help identify a loading concern, but it does not substitute for a required certified weighing or prove that every part of the combination is within its limit. When exact weights are needed, arrange an appropriate scale check.
If the display is unavailable or seems inconsistent, note the exact message, loading conditions and any suspension, tire or equipment changes. Contact the Weber Ford service team with those details instead of treating an uncertain reading as permission to continue loading.
Questions about Onboard Scales and Smart Hitch
Does a favorable display increase my towing capacity?
No. These are assistance features. The truck, axles, tires, hitch and trailer retain their applicable limits, and the actual vehicle configuration determines the ratings.
Do passengers and added equipment count toward payload?
Yes. Consider the complete load carried by the truck, including people, cargo and added equipment. The departure load can be different from the load present when you first checked the display.
Can I use an empty trailer’s listed weight in Smart Hitch?
Use the loaded-trailer information required by the matching manual. On the 2026 Super Duty example, the entered total includes both the trailer and its cargo.
Can Weber Ford check whether a truck has these features?
Send the VIN or stock number and identify the functions you want. Ask for an equipment check and, when available, a demonstration on the actual truck before making the feature part of your purchase decision.
Match the truck to the equipment and load
Tell Weber Ford what you carry, what you tow and which assistance features matter to you. Visit 3465 Progress Parkway, Granite City, IL 62040, or contact us before traveling from the St. Louis area.