
Weber Ford • Granite City, Illinois • St. Louis Area
The 2024 Ford Ranger lineup includes a 2.3L EcoBoost four-cylinder, an available 2.7L EcoBoost V6 and the Raptor’s 3.0L EcoBoost V6. Each serves a different shopping comparison. Use this guide for the 2024 model year, then check the engine, drivetrain, options and condition of the truck you want to buy.
Ford published the following engine outputs for the 2024 Ranger. These are manufacturer ratings for properly equipped vehicles, not a measurement of an individual used truck’s present condition. Horsepower and torque are independent attributes and may not be achieved simultaneously. The Raptor’s published output is based on premium fuel.
Sources: Ford’s 2024 Ranger introduction and 2024 Ranger Raptor introduction.
| Engine | Horsepower | Torque | Where to focus the comparison |
|---|---|---|---|
| 2.3L EcoBoost I-4 | 270 hp | 310 lb-ft | Standard engine in the regular Ranger lineup. |
| 2.7L EcoBoost V6 | 315 hp | 400 lb-ft | Available V6; confirm it on the actual listing. |
| 3.0L EcoBoost V6 | 405 hp | 430 lb-ft | Ranger Raptor application. |
Ford’s 2024 Ranger information identifies a 10-speed automatic transmission. For a used truck, confirm the drivetrain and the installed traction or differential equipment rather than assuming every Ranger with the same badge has an identical setup.
Write down whether the vehicle will spend most of its time commuting, carrying equipment, towing or traveling on unpaved surfaces. That use should guide your equipment comparison. A more powerful engine does not automatically make the truck the better fit for every job.
Review the owner instructions for the installed drive system. Ask for a demonstration of the controls, warning indicators and relevant modes. Keep capability claims tied to the year and configuration you are inspecting.
The 2024 Ranger Raptor uses the 3.0L EcoBoost V6 and has its own performance-focused chassis equipment. Ford described its electronically controlled FOX Live Valve shocks and front and rear locking differentials as part of that model’s design.
Those features are meaningful when they fit your planned use, but engine output and off-road equipment are not a substitute for checking towing and payload. A Raptor does not share every specification with a regular Ranger.
If you are considering a used Raptor, look at the vehicle’s condition and any modifications alongside its equipment list. Ask for records and an inspection appropriate to the truck rather than drawing conclusions from the trim name.
Ford’s 2024 towing guide lists up to 7,500 pounds for properly equipped 2.3L and 2.7L Ranger configurations and 5,510 pounds for Raptor. The listed ratings require the applicable Trailer Tow Package; Ford identifies package 53R, standard on Raptor, in that guide.
Do not treat those maxima as the allowance for every used Ranger. Match the exact truck to the guide, verify required equipment and account for passengers, cargo, accessories and the trailer’s load on the truck.
Use the full 2024 Ranger towing guide for the towing selection discussion. The goal here is to identify the right engine and configuration to investigate, not to approve an unverified trailer combination.
| Item to identify | Where to check | Question to ask |
|---|---|---|
| Engine and drivetrain | Listing, VIN-related equipment information and vehicle. | Does this exact truck match the powertrain I want? |
| Towing equipment | Original equipment information, receiver and relevant labels. | Which factory package and hitch components are present? |
| Payload and axle limits | The actual truck’s labels and model-year guidance. | Will my occupants, cargo and trailer load fit the applicable limits? |
| Cabin features | Vehicle inspection and option information. | Which screens, seat adjustments and other features are installed? |
| Condition and modifications | Records, inspection and physical review. | What has changed from the original configuration? |
Ask about maintenance records, history information, tire condition and any known modifications. A published factory rating does not tell you how a vehicle has been maintained or whether its current equipment matches the original build.
During a test drive, evaluate the normal operation of the vehicle and ask about any warning messages. Review the written warranty or as-is terms for the specific truck. Do not assume all 2024 Rangers carry identical remaining coverage.
For cabin details and a visit checklist, use our 2024 Ranger interior guide. Bring the same stock number to both the equipment and condition discussion.
A 2024 model-year research page describes a vehicle’s original design. It does not establish today’s asking price, availability or finance terms. Compare the actual listings and request a written proposal for the truck on your shortlist.
Use current used Ranger listings to begin. If a newer model is also an option, review new Ranger inventory separately and check each model year’s specifications.
A clear inquiry includes the stock number or VIN, your intended use and the equipment you consider essential. Ask the team to confirm availability before scheduling a visit.
No. The regular lineup has a 2.3L EcoBoost four-cylinder as its standard engine, with an available 2.7L EcoBoost V6. Ranger Raptor uses the 3.0L EcoBoost V6.
Not automatically. The configuration, equipment and model-specific ratings matter. The 2024 Raptor has more power than the regular engines but a different towing maximum.
They are for the 2024 Ranger. Check the model year of the listing and use that year’s documentation for a newer or older truck.
Weber Ford is at 3465 Progress Parkway, Granite City, IL 62040. Call 618-452-5400 or use the contact page for current hours and directions.
Send the truck’s stock number and the work or driving you expect it to do. Weber Ford can help you request the equipment and purchase information needed for a useful comparison.