
Weber Ford • Granite City • Greater St. Louis
Compare cab and bed choices, overall length, mirror clearance and 2025 exterior colors before choosing an F-250. Use the published dimensions as a starting point, then measure the actual truck with its tires, mirrors and accessories. Current inventory may include other years.
Ford’s 2025 Super Duty technical specifications list these exterior dimensions. A longer bed or cab changes the space the truck needs even when the engine and trim are the same. The dimensions below are in inches and describe factory configurations, not aftermarket equipment.
| Cab and bed | Overall length | Wheelbase | Configuration note |
|---|---|---|---|
| Regular Cab / 8-foot bed | 231.8 | 141.4 (4×2); 141.5 (4×4) | One front seating row |
| SuperCab / 8-foot bed | 254.4 | 164.1 | Check rear-seat and door access |
| Crew Cab / 6.75-foot bed | 250.0 | 159.7 | Short-wheelbase Crew Cab |
| Crew Cab / 8-foot bed | 266.2 | 175.9 | Long-wheelbase Crew Cab |
Ford lists an 80.0-inch body width without mirrors for the F-250 single-rear-wheel pickup. The technical sheet lists 105.9 inches with standard mirrors. A parking space that clears the body is not necessarily wide enough for the complete vehicle.
Measure your narrowest opening at the point the mirrors pass through. Check mirror position, door-opening room and any fixed objects beside the truck. Do not assume folded or extended towing-mirror dimensions equal the standard-mirror measurement in the table.
For a garage, include the closed door, shelves and the walking room you need. For work, include gates, loading areas and the turns needed to reach the parking position. A straight-line tape measurement cannot show every access constraint.
The same Ford technical sheet lists different F-250 heights across factory configurations. For example, the Crew Cab short-wheelbase configuration is listed at 79.3 inches in 4×2 form and 81.6 inches in 4×4 form; the Crew Cab Tremor figure is 82.6 inches, before additional options or modifications.
Use these examples to identify the right configuration, not to promise clearance under a low opening. Measure the actual truck, including roof equipment, racks, antennas and the tire or suspension setup installed on it. Allow appropriate clearance rather than relying on a door opening that merely matches a published number.
The wheelbase also changes how the truck fits into a turn or parking maneuver. If a particular driveway or jobsite is a concern, bring measurements and photographs so you can compare the vehicle with the space before purchase.
The shorter Crew Cab bed may suit a shopper who wants rear-seat space with a shorter overall truck. Check the longest item you regularly carry with the tailgate closed, along with toolbox depth and hitch clearance.
A longer bed can make a difference for work materials or equipment, but it also adds vehicle length. Compare the added cargo room against parking, trailer maneuvering and the location where the truck will spend most of its time.
A cap, rack, toolbox, bed liner or in-bed hitch can change usable space and carried weight. Inspect the finished arrangement. Bed volume and payload are separate measurements, and accessories use part of the truck’s available carrying capacity.
Ford’s 2025 Super Duty order guide lists the paint names below across the lineup. Availability varies by trim, package and paint combination. This is a model-year reference, not a claim that every trim offers every color or that each color is currently on our lot.
If you want a white F-250, distinguish Oxford White from Star White Metallic Tri-Coat. They are different paint finishes. Agate Black Metallic is the black paint name in the 2025 guide. Use the window sticker or vehicle information to verify a listing rather than relying on how a color looks on your screen.
Appearance packages can change the grille, bumpers, wheels, accents and available paint combinations. King Ranch configurations can also involve two-tone details. Ask for photographs of the actual truck and check the equipment list before assuming two examples of the same trim look identical.
For a used 2025 truck, review paint condition and any documented body repairs in addition to the original color. A factory paint name does not describe the present condition of the body or confirm whether every exterior panel retains its original finish.
Compare the installed wheel and tire combination with the factory equipment information. The 2025 lineup includes different wheel choices by trim and package; a wheel design alone does not establish the truck’s towing rating or off-road equipment.
Look at tread condition, tire size and load rating, spare-tire provision and any aftermarket changes. If the truck will tow or carry a heavy load, confirm that the tire and wheel setup is appropriate for that vehicle’s requirements.
Try the running boards, bed access and tailgate while the vehicle is parked. Consider the passengers who use the truck, the tools you reach for and whether the hitch or other equipment changes access. A visually appealing exterior should also work for the way the truck is used.
Use our 2025 F-250 engine and towing guide for the performance side of the decision. Dimensions do not determine the towing rating by themselves. Check the exact engine, axle, drivetrain, payload label and installed equipment.
Browse new F-250 inventory and used F-250 Super Duty trucks to find candidates. Tell us if the 2025 model year, a specific cab or a particular bed is essential. Current listings can include other model years.
For a business vehicle or body-equipped truck, contact the Commercial Ford Center with the finished-vehicle requirements. A pickup’s exterior chart should not be treated as a diagram for a chassis cab with a separate commercial body.
Ford’s technical sheet lists 250.0 inches for the short-wheelbase Crew Cab and 266.2 inches for the long-wheelbase Crew Cab. Check the actual truck and any added equipment before deciding whether it fits your space.
That is the published body width without mirrors. Ford also lists 105.9 inches with standard mirrors, so the body-only number should not be used as your complete parking-clearance requirement.
No. Paint availability and combinations vary by trim and package. Use the 2025 order guide and the actual window sticker to verify the combination you want.
No. Wheels and tires are part of the overall configuration, but they do not independently raise the vehicle’s certified ratings. Verify the complete truck and its loading limits.
Use documentation for the actual model and configuration. Some dimensions overlap, while single- versus dual-rear-wheel layouts and other details can differ.
Share the cab, bed, color and space requirements that matter to you. Weber Ford can help you identify the available information and plan a truck comparison at 3465 Progress Parkway, Granite City, in the St. Louis area.