Ford Trucks for Roofers Near St. Louis, MO

Weber Ford • Granite City • Greater St. Louis

A roofing truck should fit the crew, the load and the job

An estimator’s pickup, a crew truck and a truck pulling a loaded dump trailer do different work. Weber Ford helps St. Louis-area roofing contractors compare Ford trucks around the equipment and operating requirements that matter—not a one-size-fits-all recommendation.

Value Trade In Form Opened

Value Trade In

  • Vehicle Information

  • Personal Information

  • By submitting this form you agree to be contacted by a Weber Ford staff member.

Check Availability Form Opened

Check Availability

  • This field is for validation purposes and should be left unchanged.

Commercial Check Availability Form Opened

Commercial Check Availability

  • This field is for validation purposes and should be left unchanged.

Contact Us Form Opened

Contact Us

  • This field is for validation purposes and should be left unchanged.

Start with what the truck will actually do

Estimates and project supervision

Think about customer visits, daily mileage, parking, plans, measuring equipment and the tools needed for minor repairs. A pickup used this way may not need the same configuration as a material-hauling truck.

Crew and repair work

Count the people traveling together and the equipment that stays on the truck. Check usable seating, separate tool storage, ladder transport and access to frequently used supplies.

Materials and tear-off debris

Document the new materials you haul and the return load after tear-off. Evaluate the loaded trailer or dump body separately from the capacity of the pickup that looks most convenient.

Bring a list of your regular jobs, crew size, installed equipment and trailer details. Tell us whether the supplier normally delivers shingles and other heavy materials directly to the site. A truck chosen for service calls should not silently become a full-load delivery truck later.

Which Ford truck belongs on your shortlist?

Ford F-150: inspect the actual light-duty requirement

An F-150 may suit estimating, supervision, small repair crews and loads within its verified limits. Compare cab access, bed length, lockable storage and the particular truck’s payload before adding racks, boxes or trailer tongue weight. Shop new F-150 trucks and use the F-150 payload guide.

F-250 and F-350: compare the working configuration

For heavier regular cargo or trailer work, compare appropriately configured Super Duty pickups. Engine, cab, bed, axle, rear-wheel arrangement and installed equipment all matter. Start with F-250 inventory or F-350 inventory rather than assigning every Super Duty the same limit.

Chassis and completed work trucks

A service body, flatbed or dump body may be a better fit for the work than an ordinary pickup bed. Review the completed body, wheelbase, axle ratings and finished weight with the commercial team. Browse work-truck inventory for actual configurations; do not apply pickup specifications to a chassis-cab truck.

Shingles, sheathing and tools: weigh the load before choosing the truck

Use the supplier’s weight for the actual materials, including packaging, instead of assuming every bundle or sheet weighs the same. Keep people, tools, racks, toolboxes and hitch equipment in the calculation. Material volume alone does not tell you its weight.

For tear-off work, account for the actual debris, layers removed and retained moisture. A trailer that looks partly empty can still reach a weight limit. Plan disposal trips and supplier delivery around verified weights, not how high the sides can be filled.

The vehicle must remain within its payload, gross vehicle weight and axle limits, along with the applicable tire, hitch and trailer ratings. Added springs, airbags or a stronger-looking rack do not automatically increase the manufacturer’s assigned ratings. Ford’s towing dictionary explains the distinct weight terms.

A planning example—not a rating for a truck in stock

Suppose a particular truck has a 2,500-pound occupant-and-cargo allowance. Your plan adds 600 pounds of people, 300 pounds of racks and boxes not already included in that allowance, 200 pounds of tools and 900 pounds of actual trailer tongue load. That leaves 500 pounds before additional cargo.

Illustration only: 2,500 − 600 − 300 − 200 − 900 = 500 pounds. Do not subtract equipment twice if it is already included in the measured vehicle weight or stated allowance. Passing this example does not establish compliance with axle, tire, hitch, trailer or combined-weight limits.

Use the exact vehicle labels and finished configuration, and weigh the working combination when needed. Do not replace the actual calculation with a brochure’s highest available towing figure.

Ladders and storage need a separate equipment review

Ladder length and rack compatibility

Record the folded ladder lengths and total rack load. Confirm the rack’s fitment, mounting method and rated limits with its manufacturer or installer. Check overhang, access and securement requirements for the complete vehicle.

Daily loading and tool access

Try reaching the tools you use most often without unloading unrelated equipment. Compare side boxes, bed covers and service-body compartments against ladder supports and trailer access. A practical layout should fit your actual workflow.

Securement and clearance

Plan how ladders, loose tools, sheets and other cargo will be restrained. Rack height changes clearance under structures and in storage areas. Have the installed system checked for its intended load and follow applicable cargo-securement rules.

For commercial operations, consult FMCSA cargo-securement guidance and applicable state requirements. This buying guide is not a loading certification or a complete compliance checklist.

Dump trailers: evaluate the load going home, too

Record the trailer’s empty weight, gross vehicle weight rating, axle/tire ratings, hitch type and realistic loaded weight. Verify the truck’s receiver or fifth-wheel/gooseneck equipment, brake controller, electrical connection, mirrors and applicable towing package. A hitch alone does not establish the right configuration.

The load transferred to the truck consumes available carrying capacity. Review that load alongside the crew, tools and equipment already on board. Check the truck and trailer manufacturers’ instructions rather than applying a universal tongue-weight assumption to every setup.

Use the F-150 towing guide for light-duty candidates and Super Duty shopping for appropriate heavier configurations. Tell us about the loaded dump trailer before choosing an engine or trim. Do not bring a trailer for a demonstration without arranging the equipment and safety review first.

Pickup, service body or dump body?

A pickup can be useful when an open bed and removable equipment fit the business. A service body may better organize repair tools and supplies. A flatbed or dump body can solve a different loading task, but its weight, dimensions and equipment change the finished vehicle.

For an upfit, ask about body dimensions, usable capacity after installation, load distribution, electrical requirements, hoist or power-takeoff compatibility where relevant, and who provides body-system service. Confirm the completed vehicle before relying on a chassis-only payload figure.

Our Commercial Ford Center provides the starting point for those questions. Availability of a particular body, chassis or supplier arrangement needs to be confirmed for the actual proposal.

Buying a used roofing truck

A used work truck deserves a condition review tied to how it will be used next. Check maintenance records, brakes, tires, steering, suspension, bed or body damage, rust and the condition of towing equipment. Ask about idle hours when available and identify modifications.

Inspect rack and body mounting points, tool compartments, electrical additions and installed dump equipment through a qualified professional. Mileage or a clean-looking cab does not establish that the vehicle is ready for a loaded roofing route.

Compare used Ford work trucks and all-makes used trucks. Ask for vehicle-specific history and an inspection discussion; do not assume every used truck has the same warranty or preparation.

Plan service and replacement timing around the business

Bring expected mileage, idling, stop-and-go use and regular load to the maintenance conversation. Keep a record of service needs and arrange inspection before a known busy period rather than waiting for a breakdown.

Connect with Pro Elite commercial service to confirm the appropriate location, body/vehicle fit and appointment arrangements. Loaners, rentals, mobile work and turnaround times depend on availability and the work requested.

Use the finance center and trade-value tool to start the purchase discussion. Review the truck, upfit, fees, financing and existing payoff as separate parts of the proposal. Ask a qualified tax professional about business-tax treatment instead of relying on an advertised deduction.

Frequently asked questions

Is an F-150 enough for a roofing company?

It may fit an estimator, repair or supervisory role when the exact loads fall within its ratings. Material hauling or a loaded dump trailer can call for a different configuration. The job and the verified weights decide.

Does a diesel engine automatically mean more payload?

No. The final vehicle’s equipment and weight matter. Compare the actual labels and configuration rather than treating engine choice as a payload rating.

Should I buy the truck before choosing the body or rack?

Define the equipment and load requirements first. A body or rack can affect fit, weight, dimensions and usability. Confirm compatibility and the completed configuration before committing.

What should I send Weber Ford?

Send the crew count, general job role, ladder/storage dimensions, trailer specifications, expected loaded weights and stock numbers of interest. The commercial team can then discuss suitable candidates and remaining information.

Weber Ford • Granite City • Greater St. Louis

Bring your roofing requirements to Weber Ford

Start online, then plan a visit to 3465 Progress Parkway in Granite City. We welcome roofing businesses comparing work vehicles across St. Louis and the Metro East. Confirm a truck’s availability and location before traveling.

Vehicle suitability depends on the exact chassis, body, equipment, loading and applicable ratings. This page does not certify a truck/trailer combination or promise stock, body availability, financing approval or service turnaround. Follow manufacturer instructions and applicable safety requirements.

Saved Vehicles

You don't have any saved vehicles!

Look for this Save icon

Once you've saved some vehicles, you can view them here at any time.

Menu

Get Directions

3465 Progress Parkway, Granite City, IL, 62040
Weber Ford 38.733511, -090.143386.